Chemical Feed Pumps
swtwater.com Double Head Fixed Output Pumps
SWT Double Head Fixed Output Pump SWT’s double head fixed output metering pump is built with three detachable components; the motor and two pump heads. The fixed rate pump does not have an output adjustment. The output is determined by the rpm of the motor gears and the size of the pump tubes in both heads. The motor’s output shaft rotates at a fixed rpm which drives the roller assembly within the pump head.
 
Double Head Fixed Output Pumps — 26 rpm — Low Pressure: 0 to 25 psi (1.7 bar)
PART NUMBER TUBE SIZE OUTPUT CONNECTION
SIZE
GPD @ 60 Hz LPD @ 50 Hz
TS100DMP1 #1 6 18.2 1/4 inch
TS100DMP2 #2 20 60.6 1/4 inch
TS100DMP3 #3 44 133.2 1/4 inch
TS100DMP4 #4 70 212.0 1/4 inch
TS100DMP5 #5 100 302.8 1/4 inch
TS100DMP1-3 #1 6 18.2 3/8 inch
TS100DMP2-3 #2 20 60.6 3/8 inch
TS100DMP3-3 #3 44 133.2 3/8 inch
TS100DMP4-3 #4 70 212.0 3/8 inch
TS100DMP5-3 #5 100 302.8 3/8 inch
 
Double Head Fixed Output Pumps — 26 rpm — High Pressure: 0 to 100 psi (6.9 bar)
PART NUMBER TUBE SIZE OUTPUT CONNECTION
SIZE
GPD @ 60 Hz LPD @ 50 Hz
TS100DMPHP5 #1 6 18.2 1/4 inch
TS100DMPHP20 #2 20 60.6 1/4 inch
TS100DMPHP5-3 #1 6 18.2 3/8 inch
TS100DMPHP20-3 #2 20 60.6 3/8 inch
 
Double Head Fixed Output Pumps — 44 rpm — Low Pressure: 0 to 25 psi (1.7 bar)
PART NUMBER TUBE SIZE OUTPUT CONNECTION
SIZE
GPD @ 60 Hz LPD @ 50 Hz
TS170DMP1 #1 10 30.3 1/4 inch
TS170DMP2 #2 34 102.6 1/4 inch
TS170DMP3 #3 80 242.2 1/4 inch
TS170DMP4 #4 120 363.4 1/4 inch
TS170DMP5 #5 170 514.8 1/4 inch
TS170DMP1-3 #1 10 30.3 3/8 inch
TS170DMP2-3 #2 34 102.6 3/8 inch
TS170DMP3-3 #3 80 242.2 3/8 inch
TS170DMP4-3 #4 120 363.4 3/8 inch
TS170DMP5-3 #5 170 514.8 3/8 inch
 
Double Head Fixed Output Pumps — 44 rpm — High Pressure: 0 to 100 psi (6.9 bar)
PART NUMBER TUBE SIZE OUTPUT CONNECTION
SIZE
GPD @ 60 Hz LPD @ 50 Hz
TS170DMPHP9 #1 10 30.3 1/4 inch
TS170DMPHP34 #2 34 102.6 1/4 inch
TS170DMPHP9-3 #1 10 30.3 3/8 inch
TS170DMPHP34-3 #2 34 102.6 3/8 inch
 
NOTE: The above information is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing environment. Many variables can affect the output of the pump. The manufacturer recommends that all metering pumps undergo field calibration by means of analytical testing to confirm their outputs.
 
 
 
Safe Water Technologies, Inc.
996 Bluff City Boulevard
Elgin, IL 60120 USA
 
 
Telephone: +1.847.888.6900
Facsimile: +1.847.888.6924
E-mail: info@swtwater.com
https://www.swtwater.com

Last Updated: June 13, 2018