Drain Line Air Gaps
swtwater.com Mr. Drain™
Mr. Drain Air Gap (P/N SM-I5056)
 
Mr. Drain Air Gap dimensions
DIMENSIONS
in inches
Mr. Drain Air Gap (P/N SM-I5056) is designed to provide an effective way of connecting water softeners and water filters to 1½ and 2-inch drain lines.

Mr. Drain features a single inlet port that connects 1/2-inch piping or 5/8-inch tubing from a water softener or filter to the drain line. The unique feature of this air gap is being able to accommodate 1½ and 2-inch standpipe drains with ease. In addition, a special design of this air gap enables installation of multiple air gaps into the same drain connection. Up to three Mr. Drain Air Gaps can be installed into the same drainpipe to provide total of six simultaneous water discharge connections.

Mr. Drain uses a special plastic material that minimizes mold growth and provides a strong connection between piping, tubing, and drain line.
 
 
FEATURES:
1/2-inch OD inlet port for 1/2-inch PVC
5/8-inch ID inlet port for polyethylene tubing
Installs in both 1½-inch and 2-inch standpipes
Standpipes can accommodate up to three units at a time
Built-in splash guards assure a completely dry operation
Legal to install in any state, UPC Listed, IPC and NSF tested
 
 
TYPICAL APPLICATIONS:
Mr. Drain Air Gap Typical Installation
 
Mr. Drain Air Gap mounted in 1-1/2 inch standpipe Mr. Drain Air Gap mounted on 1-1/2 inch standpipe Mr. Drain Air Gap mounted on 2 inch standpipe Mr. Drain Air Gap mounted in 2 inch standpipe
One Air Gap
1-1/2 inch standpipe
mounting
One Air Gap
2 inch standpipe
mounting
   
Two Mr. Drain Air Gaps mounted on 1-1/2 inch standpipe Three Mr. Drain Air Gaps mounted on 2 inch standpipe
Two Air Gaps
1-1/2 inch standpipe
mounting
Three Air Gaps
2 inch standpipe
mounting
 
 
 
Safe Water Technologies, Inc.
996 Bluff City Boulevard
Elgin, IL 60120 USA
 
 
Telephone: +1.847.888.6900
Facsimile: +1.847.888.6924
E-mail: info@swtwater.com
https://www.swtwater.com

Last Updated: April 1, 2024