(PVC) Rust Proof and Corrosion Resistant
FLO-CONTROLET is completely rust proof and corrosion resistant. Field of application is much wider than with
metal controllers. Ideally suited for use on commercial/industrial water treatment equipment, irrigation systems,
cooling towers, and many other applications where a constant flow rate is required and variable pressures are
encountered. They are low in cost and easy to install, requiring no adjustment or maintenance. Completely
tamperproof, yet easily altered in the field if increases or decreases in flow rate are desired.
(PVC) Full Range of Sizes and Capacities
Sizes range from 1/2 inch to 6 inch including threaded, spigot (plain end), flanged, and flanged disc models.
Flow capacities are available in increments of 1 gpm from 5 through 540 gpm using Buna-N control inserts
(Table B), and in various flow rates from 0.25 through 3.5 gpm (Table A),
and 12, 15, and 20 gpm (Table C). All models are capable of modification through simple
substitution of different rated control inserts.
|
|
(PVC DISC) Space Saver
The disc is a space saver and money saver, ideal to use where space is limited and/or cost is paramount.
Sizes range from 2 inch to 6 inch with flow rates from 35 gpm to 540 gpm.
(STEEL) Extra Heavy Construction
For that rugged duty application, Flo-Controlet is constructed with an extra heavy galvanized steel housing
which allows for drilling and tapping for control pilot drains, instrumentation, etc. They are low in cost
and easy to install, requiring no adjustment or maintenance. Completely tamperproof, yet easily altered in
the field if increases or decreases in flow rate are desired.
(STEEL) Full Range of Sizes and Capacities
Sizes range from 3/4 inch to 6 inch threaded models. Flow capacities are available in increments of 1 gpm from 5
through 540 gpm using Buna-N control inserts and in various flow rates from 0.25 gpm through 3.5 gpm. All models
are capable of modification through simple substitution of different rated control inserts.
(BRASS) Two Models 1/2 Inch Size
Use when mating valves and other appliances when use of dissimilar metals is not appropriate. Available in one
size, 1/2 inch NPT. Flow rates from 0.25 gpm to 10 gpm.
Flow Control Inserts
Buna-N inserts are precision molded from material that has a control accuracy of plus or minus 10% when installed.
The material complies with existing FDA regulations for application in food handling systems.
Note: 5 to 10 gpm are color coded (other size inserts are not color coded) |