|
SWT’s Premium™ Reverse Osmosis System (P/N RO23802-50)
provides up to 50 gallons per day of high quality water. Reverse Osmosis (RO) technology allows the homeowner to enjoy bottled
water quality from the tap at a fraction of the cost and with none of the aggravation. |
|
|
|
RO systems can be serviced and maintained in less than 1/2 hour per year. You receive clear, refreshing
water that is not only healthy to drink, but is good for appliances such as ice makers, steam irons, humidifiers,
and car batteries. It’s better for your pet’s drinking water too. |
|
HOW THE SYSTEM WORKS: |
• |
The first stage utilizes a finely porous carbon block. This carbon block removes sediment such
as silt, sand, grit, and sludge which may be present in the water supply. The carbon matrix
adsorbs chlorine, taste, odor, color, pesticides, and an extensive list of chemical compounds
that have been found in water supplies and are deemed health risks by the EPA ( see list below).
|
• |
The water is then hyperfiltrated through a reverse osmosis element that treats the water down to
the molecular level. It will reject 93% to 99+% of contaminates such as salt, nitrates, lead,
fluoride, iron, copper, mercury, and arsenic. It also filters out larger organisms such as giardia
cysts and cryptosporidium ( see list below).
|
• |
The water then enters the RO storage tank until needed.
|
• |
The final stage is a second carbon filter which is used to polish the RO water as it comes out
of the storage tank just prior to the faucet.
|
|
Units include all necessary installation hardware. |
|
ADDITIONAL INFORMATION:
SWT Residential RO Systems Guide |
|
|
|
|
SWT PREMIUM™ RO SYSTEM PERFORMANCE SPECIFICATIONS |
With proper installation and maintenance the RO membrane
module in the SWT Premium™ Reverse Osmosis System will reject the following substances from tap water:
Arsenic
Barium
Bicarbonate
Boron
Bromide
Cadmium
Calcium
Chloride
Copper
Cyanide
Flouride
Hardness
Iron
Lead
Magnesium
Manganese
Mercury
Nickel
Nitrate
Phosphate
Potassium
Pyrogen
Selenium
Silica
Silicate
Silver
Sodium
Strontium
Sulfate
Zinc |
94-96%
96-98%
95-96%
60-70%
93-96%
96-98%
94-97%
87-95%
98-99%
86-95%
94-96%
95-98%
95-98%
96-98%
96-98%
98-99%
96-98%
98-99%
90-96%
96-99%
87-97%
98-99%
96-98%
85-90%
95-97%
95-97%
87-98%
96-98%
98-99%
98-99% |
...plus more.
The RO membrane module will also aid in the removal of color, asbestos, and cysts such as giardia and
cryptosporidium.
Contact your SWT representative for more details.
|
|
The SWT Premium™ RO System has two carbon filtration modules which will remove, or significantly
reduce, over 50 chemical substances that the EPA has deemed potential carcinogens. They include:
|
Adipates (diethylhexyl)
Alachor
Aldicarb
Aldicarb sulfone
Aldicarb sulfoxide
Atrazine
Benz (a) anthracine (PAH)
Benzene
Benzo (a) pyrene (PAH)
Benzo (b) floranthene (PAH)
Benzo (k) floranthene (PAH)
Beryllium
Butyl benzyl phthalate (PAE)
Cadmium
Carbofuran
Carbon tetrachloride
Chlordane
Chlorine
Chromium (+3)
Chrysene
Dalapon
Di (2-ethylhexl) adipate
Dibenz (a,h) antracene
Dibromochloropropane |
Dichlorobenzene (meta-)
Dichlorobenzene (ortho)
Dichlorobenzene (para-)
Dichloroethane (1,2-)
Dichloroethylene (1,1-)
Dichloroethylene (cis-1,2-)
Dichloroethylene (trans-1,2)
Dichloropropane
Diethylhexyl phthalate (PAE)
Dinoseb
Diquat
Endothall
Endrin
Ethylbenzene
Ethylene dibromide (EDB)
Glyphosate
Heptachlor
Heptachlor epoxide
Hexachlorobenzene
Hexachlorocyclopentadiene
Indo (1,2,3-c,d) pyrene (PAH)
Lidane
Mercury (organic complexes)
Methoxychlor |
Monochlorobenzene
Organic color
Organics
Oxymal
Pentachlorophenal
Picloram
PCB’s
Simazine
Styrene
3,7,8-TCDD (dioxin)
2,4-D
2,4,5-TP (silvex)
TCB’s
TCE’s
Tetrachloroethylene
Thallium
THM’s
Toulene
Toxaphane
Vinyl chloride
Xylenes |
|
|
|
GENERAL INSTALLATION AND SERVICE PARAMETERS |
The SWT Premium™ RO System will work at peak efficiency on either municipal or
ground water supplies that do not exceed the following:
Maximum psi
TDS
Iron
Hardness
Hydrogen Sulfide
Manganese |
125 lbs.
1800 ppm
0.4 ppm
17 gr/gal
0.05 ppm
0.1 ppm |
The SWT Premium™ has been designed to give many years of trouble free service. To keep the system
operating in peak efficiency, it is recommended that the unit be inspected every six months for possible
prefilter sediment clogging (especially if there is a lot of sediment in the water supply).
|
|
The manufacturer recommends that the system be serviced on an annual basis to replace
the carbon filtration modules and the RO membrane module.*
* The RO membrane module may last for a much longer period of time on relatively good water. Check
with your Water Treatment Professional for local water characteristics and testing.
|
|
|
|
|
|