|
|
 |
|
SWT’s Logix Series Residential Water Softeners utilize our
ProSoft™ resin.
This is the same resin SWT used to treat the water servicing the Capitol Building in Washington DC! Also available
is the newest in computer monitoring technology for maximized efficiency. Plus, these systems now feature SWT’s
revolutionary Cyclonic Distributor System™ to provide full bed contact, less channeling,
and superior backwashing.
| • |
100% corrosion free system with attractive all black components |
| • |
Energy efficient controller uses less than $5.00 of electricity per year |
| • |
Never lose system memory and timer clock to power failure
— no battery required for backup! |
| • |
Computerized controller monitors and adjusts
to actual water usage |
| • |
All units include upper screen, brine pickup with air check, brine well overflow
connection, brine tank with injection molded lid, brine line tube and connectors |
| • |
10 year warranty on tank, 5 year warranty on valve |
| • |
All components NSF listed |
| • |
All international voltages available |
|
|
| |
| Computer Metered Systems with Professional Programming and Water Use Averaging |
| Part Number |
Tank Size
Inches |
System
Service
Flow Rate |
Softening Capacity *
Grains / Lbs of Salt |
Max. Valve
Flow Rate
@ 15 psid
|
Standard
Connection
Size |
| 6 lbs/cu ft |
10 lbs/cu ft |
15 lbs/cu ft |
| WSC761P2-75 |
8 x 44 |
Up to 5 GPM |
17,850 |
22,650 |
25,800 |
25 GPM |
1 inch Copper Tube |
| WSC761P2-10 |
9 x 48 |
Up to 7 GPM |
23,800 |
30,200 |
34,400 |
25 GPM |
1 inch Copper Tube |
| WSC761P2-15 |
10 x 54 |
Up to 10 GPM |
35,700 |
45,300 |
51,600 |
25 GPM |
1 inch Copper Tube |
| WSC761P2-20 |
12 x 52 |
Up to 12 GPM |
47,600 |
60,400 |
68,800 |
25 GPM |
1 inch Copper Tube |
|
| |
| Electronic Time Clock Systems with Semi-Programmable Regeneration |
| Part Number |
Tank Size
Inches |
System
Service
Flow Rate |
Softening Capacity *
Grains / Lbs of Salt |
Max. Valve
Flow Rate
@ 15 psid |
Standard
Connection
Size |
| 6 lbs/cu ft |
10 lbs/cu ft |
15 lbs/cu ft |
| WSC741P-75 |
8 x 44 |
Up to 5 GPM |
17,850 |
22,650 |
25,800 |
25 GPM |
1 inch Copper Tube |
| WSC741P-10 |
9 x 48 |
Up to 7 GPM |
23,800 |
30,200 |
34,400 |
25 GPM |
1 inch Copper Tube |
| WSC741P-15 |
10 x 54 |
Up to 10 GPM |
35,700 |
45,300 |
51,600 |
25 GPM |
1 inch Copper Tube |
| WSC741P-20 |
12 x 52 |
Up to 12 GPM |
47,600 |
60,400 |
68,800 |
25 GPM |
1 inch Copper Tube |
|
| |
| Computer Metered Systems with Semi-Programmable Regeneration and Water Use Averaging |
| Part Number |
Tank Size
Inches |
System
Service
Flow Rate |
Softening Capacity *
Grains / Lbs of Salt |
Max. Valve
Flow Rate
@ 15 psid |
Standard
Connection
Size |
Low
3.3 lbs/cu ft |
Standard
9 lbs/cu ft |
High
15 lbs/cu ft |
| WSC761P-75 |
8 x 44 |
Up to 5 GPM |
11,000 |
19,000 |
23,000 |
25 GPM |
1 inch Copper Tube |
| WSC761P-10 |
9 x 48 |
Up to 7 GPM |
15,000 |
25,000 |
30,000 |
25 GPM |
1 inch Copper Tube |
| WSC761P-15 |
10 x 54 |
Up to 10 GPM |
22,000 |
38,000 |
45,000 |
25 GPM |
1 inch Copper Tube |
| WSC761P-20 |
12 x 52 |
Up to 12 GPM |
28,000 |
50,000 |
60,000 |
25 GPM |
1 inch Copper Tube |
|
| * |
Operating capacities based on influent of 400 ppm as CaCO3 with a ratio of 2 parts calcium to 1 part
magnesium at 2.0 gpm/cu.ft. flow rate. Capacities include 10% safety factor. |
| |
Operating Pressure:
20 to 120 psi Operating Water Temperature: 35 to 100°F |
|
| |
| |
| Options: |
|
Substitutions by Request: |
| |
|
|
|
| PART NUMBER |
DESCRIPTION |
|
DESCRIPTION |
| RG-TJ0844EC |
Chrome Tank Jacket, 8 x 44 inch |
|
Substitute 0.75 inch Copper Fittings |
| RG-TJ0948EC |
Chrome Tank Jacket, 9 x 48 inch |
|
Substitute 0.75 or 1 inch PVC Socket Fittings |
| RG-TJ1054EC |
Chrome Tank Jacket, 10 x 54 inch |
|
Substitute 0.75 or 1 inch PVC NPT Fittings |
| RG-TJ1252EC |
Chrome Tank Jacket, 12 x 52 inch |
|
Substitute 0.75 or 1 inch Brass NPT Fittings |
| |
|
|
|
| UA/BV1256 |
Bypass Valve |
|
Substitute Brine Tank, 18 x 33 inch, Black |
| UA-1244336 |
Chlorine Generator — Brine Cycle |
|
Substitute Brine Tank, 18 x 40 inch, Black |
| UA-1268102 |
Low Salt Indicator — Brine Cycle |
|
|
| |
|
|
|
| Grid plates, safety floats in brine tank, and alternate packaging for individual shipment also available. |
| |
|
|
|
|
| |
| NOTES: |
A black 15 x 17 x 33 inch brine tank with injection molded lid is standard.
Substitutions are available on request. See “Options” above.
|
1 inch copper tube installation fittings are standard. Substitutions are
available on request. See “Options” above.
|
All units are supplied with ProSoft™ Premium 8% crosslink resin.
Resin substitutions are available on request at extra cost.
|
Resin ratings are as follows:
|
| |
CROSSLINK |
CaCO3 CAP @ 15 lbs./cu.ft. |
ProSoft™ Gold
|
7% |
32,000 |
| ProSoft™ Premium |
8% |
33,000 |
| ProSoft™ Fine Mesh |
8% |
34,600 |
| ProSoft™ Heavy Duty |
10% |
35,600 |
| ProSoft™ High Porosity |
12% |
28,000 |
|
| In basic terms, crosslinkage refers to the resin beads’ physical
strength or ability to withstand chemical attack from chlorine, resin bed cleaners, and caustics used in DI applications. |
| |
| |
 |
|
| SWT Systems Include the REVOLUTIONARY |
| CYCLONIC DISTRIBUTOR SYSTEM™ |
|
| • |
Up to 30% less backwash flow rate is required...conserving water for the customer |
| • |
Distributor plate is designed for more than 6,500 lbs load capacity |
| • |
Reduces system pressure loss while increasing flow and efficiency through the bed |
| • |
Bottom plate distributor (shown left) available for 7, 8, 9, 10, 12, 13, 14, and 16 inch diameter tanks |
| • |
Mid plate distributors (up to 4 per tank) available for 10 inch and 13 inch diameter tanks |
This environmentally friendly design offers the most efficient service and backwashining
characteristics available — reducing the amount of water to drain in backwash, while increasing the
overall filtration capacity of a system. Click here
for more information. |
|
|
| |
| |
|
