Steel Tanks
swtwater.com Stainless Steel Tanks
SWT's Stainless Steel Tanks
Stainless Steel Tanks are produced to meet industry standards and can be used for filters, softeners, and deionization systems.
 
FEATURES:
Resistant to ultraviolet rays
More durable than fiberglass, ABS, or poly tanks
Adds no taste or odor to the water
Clean, attractive look
Long life (will not rust)
Tank liner available
304 stainless steel construction (316 SS available)
100 psi maximum operating pressure
Made in USA
 
OPTIONS:
Polymer alloy liner for abrasive media backwashing
(change N in part number to L — example: TA2460S40L)
316 stainless steel construction (add -316 to end of part number — example: TA2460S40N-316)
 
 
8 INCH DIAMETER TANKS
Part
Number
Tank
Size
Inches
Top
Opening
Capacity
Cu.Ft.
50% FB
Height
Inches
Gauge Weight
Lbs.
Overall Shell Head Shell
TA0815S20N 8 x 15 2.5"-8 NPSM 0.50 18 15.75 14 14 15
TA0836S20N 8 x 36 2.5"-8 NPSM 0.52 40 36 14 14 24
TA0848S20N 8 x 48 2.5"-8 NPSM 0.85 52 48 14 14 30
 
10 INCH DIAMETER TANKS
Part
Number
Tank
Size
Inches
Top
Opening
Capacity
Cu.Ft.
50% FB
Height
Inches
Gauge Weight
Lbs.
Overall Shell Head Shell
TA1015S20N 10 x 15 2.5"-8 NPSM 0.50 18 15.75 14 14 19
TA1036S20N 10 x 36 2.5"-8 NPSM 0.90 40 36 14 14 30
TA1040S20N 10 x 40 2.5"-8 NPSM 1.00 44 40 14 14 33
TA1048S20N 10 x 48 2.5"-8 NPSM 1.50 52 48 14 14 37
TA1048S20N125D* 10 x 48 2.5"-8 NPSM 1.50 52 48 14 14 37
TA1060S20N 10 x 60 2.5"-8 NPSM 2.00 65 60 14 14 45
  * Includes dome hole port with plug
 
12 INCH DIAMETER TANKS
Part
Number
Tank
Size
Inches
Top
Opening
Capacity
Cu.Ft.
50% FB
Height
Inches
Gauge Weight
Lbs.
Overall Shell Head Shell
TA1215S20N 12 x 15 2.5"-8 NPSM 0.50 18 15.75 14 14 19
TA1236S20N 12 x 36 2.5"-8 NPSM 1.50 40 36 14 14 43
TA1248S20N 12 x 48 2.5"-8 NPSM 1.70 52 48 14 14 53
TA1248S20N125D* 12 x 48 2.5"-8 NPSM 1.70 52 48 14 14 53
  * Includes dome hole port with plug
 
14 INCH DIAMETER TANKS
Part
Number
Tank
Size
Inches
Top
Opening
Capacity
Cu.Ft.
50% FB
Height
Inches
Gauge Weight
Lbs.
Overall Shell Head Shell
TA1440S20N 14 x 40 2.5"-8 NPSM 2.00 44 40 14 14 55
TA1448S20N 14 x 48 2.5"-8 NPSM 2.25 52 48 14 14 63
TA1460S20N 14 x 60 2.5"-8 NPSM 3.00 65 60 14 14 75
TA1460S20N125D* 14 x 60 2.5"-8 NPSM 3.00 65 60 14 14 75
  * Includes dome hole port with plug
 
18 INCH DIAMETER TANKS
Part
Number
Tank
Size
Inches
Top
Opening
Capacity
Cu.Ft.
50% FB
Height
Inches
Gauge Weight
Lbs.
Overall Shell Head Shell
TA1848S40N 18 x 48 4"-8 UN 4.00 52 48 12 12 117
TA1860S40N 18 x 60 4"-8 UN 5.00 65 60 12 12 138
 
24 INCH DIAMETER TANKS
Part
Number
Tank
Size
Inches
Top
Opening
Capacity
Cu.Ft.
50% FB
Height
Inches
Gauge Weight
Lbs.
Overall Shell Head Shell
TA2448S40N 24 x 48 4"-8 UN 6.00 52 48 12 12 198
TA2460S40N 24 x 60 4"-8 UN 8.00 65 60 12 12 198
 
 
VACUUM PROTECTION & FLEX CONNECTORS
Fiberglass/composite pressure vessels are rated for an internal negative pressure of 5-inches Hg (17 Pa) vacuum below atmospheric. If negative pressure could ever exceed 5-inches Hg (17 Pa), an adequate vacuum breaker must be installed between the pressure vessel inlet and any valves (see illustration right). For enclosed tank applications, the vacuum breaker should be installed at the highest location in the system plumbing.

System connections to the pressure vessel must accomodate vertical expansion between side, top, and bottom openings. Either flexibility in piping or flex connectors, as shown here, are recommended.
SWT Vacuum Breaker and Flex Connector installation diagram

See SWT Vacuum Protection
and Flex Connector Products
 
 
 
Safe Water Technologies, Inc.
996 Bluff City Boulevard
Elgin, IL 60120 USA
 
 
Telephone: +1.847.888.6900
Facsimile: +1.847.888.6924
E-mail: info@swtwater.com
https://www.swtwater.com

Last Updated: October 28, 2024